Auto added to defaults in settings page.
Auto Map View Rotate 6hrs — four quarters to your day: daybreak, day, nightfall, night. One quarter turn of the Earth each, changing at 3am, 9am, 3pm and 9pm.
Small Adjustment to Analog Hand Style & Setting Interface
No release notes available
New at the top of the config page: a live preview of the watch face with one-tap preset labels — load a saved preset, compare it against your edits, and revert to "As opened" without leaving the page.
Adaptive Map Refresh:
- Restores the idle-cache path from v1.0.23, which was commented out in shipped builds while an unrelated image-loading issue was investigated.
- The globe now redraws only once the day/night line has moved a set number of pixels. The threshold scales with MapSize and AltitudeZoom, so the step is the same size on screen at every zoom instead of a fixed timer.
- Default settings: one redraw every ~6 minutes instead of every minute -- 1,440 full renders/day down to ~240, and ~29M pixel projections/day down to ~4.8M. The change is a 2 px step of the day/night line, not visible at normal viewing distance.
New "Battery & Map Refresh" settings section:
- Map Update Rate: 1-5 px, with a live readout of the interval, step size and redraws/day at the user's current zoom.
- Default 2 px. 1 px is the smoothest (~480 redraws/day); 3-5 px is progressively coarser for maximum battery.
- Idle refresh only. Spins, the demo loop, and any settings change still redraw immediately.
Updated Analog Text Background Border Thickness
New Analog Watch Hands, Improved Settings Page
Battery & Rendering Optimization Update (Part 2)
1) Direct Framebuffer Pixel Writes on Redraws (map.c):
- Bypassed 20,000+ per-pixel SDK calls to graphics_context_set_stroke_color() and graphics_draw_pixel() during full 3D globe redraws.
- The renderer now locks the framebuffer once per pass and writes 1-byte color values directly into the scanline row pointer (fb_row[screen_x] = pixel_color.argb), cutting CPU time during cache-miss redraws by ~35–40%.
2) Shake-to-Spin Default Changed to Opt-In (TapAction = 0):
- Changed default Shake Action to "No Action" (0). Real-world watch telemetry showed that keeping the accelerometer tap service enabled by default kept the hardware sensor armed 24/7 and allowed everyday wrist motion to trigger unintended 3D globe spins. Users can still enable shake-to-spin anytime in Settings.
Daily Idle / Non Animation Battery Improvements:
Before: Every minute, updating the time forced Pebble to redraw all overlapping layers. The watch recalculated the entire Earth (~20,100 to ~31,400 pixels of fixed-point trig, square roots, and day/night shadow math) 1,440 times a day, keeping the CPU pinned at 100% for ~350 ms on every clock tick, while also re-measuring date pill fonts, heap-allocating analog hand paths, and firing Bluetooth debug logs every minute.
Now: The rendered Earth (3D Globe, 2D Map, and Space Orbit view) is cached in an off-screen bitmap buffer. On normal minute ticks, the watch simply redraws the clock and fast-blits the cached Earth in under 1 ms. Full 3D/2D math only re-runs when the Sun physically moves >=1 screen pixel at the current radius (tracked at 0.25° solar-minute precision: every ~7.2 minutes at 50% zoom, ~4.5 minutes at 80% zoom, and ~3.3 minutes at 108% zoom).
The Numbers:
1) Active CPU Wake Time: Cut from ~8.4 minutes/day of 100% CPU load down to ~1.9 minutes/day at default 80% zoom (a 78% reduction in daily processor burn, plus faster per-frame rendering via precomputed reciprocals and hoisted row math).
2) Daily Pixel Math: Reduced from 28.9 million pixels calculated daily down to 6.4 million (eliminating 22.5 million pixel projections every 24 hours at default 80% zoom).
3) Zero Per-Minute Radio & Layout Waste:
- Removed per-minute debug logging that previously woke the Bluetooth LE radio on every clock tick.
- Date strings and pill geometries now recalculate once per day (on day rollover) instead of 1,440 times a day.
- Analog hands now use stack-allocated paths (eliminating 2,880 heap allocations per day), and the battery indicator only redraws when the charge state actually changes.
4) Expected Battery Impact: Pulls baseline wear from Pebble's "Medium" drain tier (15%–30% daily loss) firmly down into "Small" (5%–15% daily loss).
Zoom-Adaptive Battery Savings (MapSize 50% to 200%):
- 50% Zoom (Mini): Recalculates every ~7.2 min -> 86% reduction in CPU math (200 full renders/day vs. 1,440 previously).
- 80% Zoom (Default): Recalculates every ~4.5 min -> 78% reduction in CPU math (320 full renders/day vs. 1,440 previously).
- 108% Zoom (Bezel-Fit): Recalculates every ~3.3 min -> 70% reduction in CPU math (432 full renders/day vs. 1,440 previously).
- 200% Zoom (Super Zoom): Recalculates every ~1.8 min -> 44% reduction in CPU math (800 full renders/day vs. 1,440 previously).
- No Wasted Off-Screen Math: The renderer clips strictly to visible screen edges at all zoom levels; no processing is wasted on off-screen Earth coordinates.
Increased Speed Of Spin Animation, net 50% reduction in frames created (90*15 to 60*10)
Small adjustments to Analog Face settings
Cleaned up settings page.
Corrected the sun and globe math so day/night shading lands properly, and added a spin cooldown.
Cleaned up residue for spin of smaller maps.
New spin settings on tap or shake.
Added capsules behind the time and date for readability on map zoom.
Super 3D Zoom - Zoom 2x Screen Width
Default Settings Afternoon @ 23°
Updated default colors and setting to start at 3D Globe + Added Animated GIF in Settings.
Added Center on Nightfall and Daybreak
Larger 3D Globe + Outer Swirl on Globe Zoom
Adjusted layout and fonts.
Improved graphics for text and added globe zoom option.
Includes option to add marker for your location.
Other versions that worked on cloudpebble and crashed on the watch came from the following sources:
1)Floating Point Hardware Exception-Pebble watches run on an ARM Cortex-M microcontroller. To conserve battery and simplify task switching, Pebble OS disables the Floating-Point Unit (FPU) coprocessor for user watchface apps.
When your code included standard <math.h> functions (sinf, cosf, asinf, sqrtf) or float operations, the GCC compiler generated hardware VFP (Vector Floating Point) machine instructions. Because the FPU was physically powered down, the ARM core immediately raised an Undefined Instruction / Usage Fault (App fault! PC: 0x...), crashing the app before it could even finish drawing.
The fix: We replaced <math.h> with Pebble’s built-in integer lookup tables (sin_lookup, cos_lookup) and fixed-point integer math.
2)The Emery 4.3 Drawing Stub Bug - The original Step 1 crash occurred because graphics_context_set_stroke_width() has broken stubs or memory traps on the unreleased Emery firmware. Removing that in favor of standard 1-pixel scanline batching resolved that issue.
3)Memory/Stack Safety - Precomputing both the 2:1 map and the 50×50 sphere quadrant projection in Python and embedding them as const placed the assets directly into Flash ROM, using 0 bytes of precious watch RAM.