# Timer Deck 0.7.1
New stopwatch is one press away, and the Deck list wraps around.
- "New stopwatch" now sits on the Deck, between "New timer" and "Timer Chains". The Deck Menu keeps Settings and Help / About.
- Up and Down wrap: Down on "Menu / Settings" jumps to the first row, and Up on the first row jumps to "Menu / Settings".
- The empty-Deck illustration is smaller so it fits below the four rows.
- Timers, Timer Chains, phone settings and saved data (schema 10) are unchanged.
This release was tested on the host and in the SDK emulator. It was not physically reviewed on a watch before release.
# Timer Deck 0.7.0
Finished timers now clear themselves.
- Press Back on the "done" screen to stop the alert and put the queued timers back to Ready. Select still clears just the timer shown.
- If you don't press anything, a timer that alerted you returns to Ready on its own 10 minutes after it finished.
- A timer that finished while you were away, without alerting you, stays Finished until you clear it.
- The launcher's "finished" and chain "complete" lines now disappear after 10 minutes.
- Timer Chain controls, phone settings and saved data (schema 10) are unchanged.
This release was tested on the host and in the SDK emulator. It was not physically reviewed on a watch before release.
# Timer Deck 0.6.0
Add several timers from your phone in one go.
- In My Apps → Timer Deck → Settings, tap Add timer, then Add another timer to fill in up to three new countdowns or stopwatches before saving. One save sends them all; reopen settings to see them.
- Timers are added in order, in Ready state. If one can't be added (for example, the deck changed on the watch), the ones not added stay on the page for review, and nothing is added twice.
- The deck limit is still 10 timers. Watch controls, chains, saved data (schema 10) and existing settings are unchanged.
Keep Timer Deck open on your watch while saving. This release was tested on the host, in a desktop browser and in the SDK emulator; it was not physically reviewed on a watch before release.
# Timer Deck 0.5.1
A shorter, clearer phone settings page.
- The timer editor now sits directly below Choose timer.
- Timer and chain editors start folded. Tap a heading or choose an item to open its editor.
- Chains show their filled step rows, with at least two rows. Add step reveals one more row at a time, up to ten.
- A shorter first-run page removes repeated hints and keeps Add timer with the empty deck.
- Help / About now shows version 0.5.1. Watch behavior and saved data are unchanged; storage schema remains 10.
# Timer Deck 0.5.0
Save and run a sequence of countdowns with Timer Chains.
- Keep up to five chains of two to ten steps, with one to nine rounds. Create them on the watch or in the Pebble phone app's settings.
- Start from an empty chain, copy countdowns in your chosen order, or use the Pomodoro, Plank and Tea templates. Copies keep their configured duration and settings; the original timers stay independent.
- Reach chains directly from the Deck. During a run, the row shows the current step and remaining time. Hold Select to start a saved chain or open the full list from an active Deck row.
- Pause or resume with Select, restart a step with Down, and skip it by holding Down. Up opens chain actions. Holding Up on a saved chain deletes it immediately, including ending its active run.
- Eligible steps can alert from the watchface and return there after the cue. Steps shorter than 60 seconds require Timer Deck to stay open. The 60-second cutoff is an engineering limit, not a validated guarantee of alert timing; Pebble OS scheduling and nearby timers can affect delivery.
- Fix native decoding of phone-created and edited chain steps, with explicit numeric bounds.
- Existing countdowns, stopwatches, appearance and ten-item Deck capacity are preserved. Saved data upgrades to schema 10; older versions cannot read it.
Keep Timer Deck open while saving phone settings. A running chain is locked against phone edits and deletion. Timing and watch controls work without a phone.
The owner reported successful PT2 tests of the development build's watchface alerts, automatic return, saved-data upgrade and phone chain editor. The full interval/conflict/reboot matrix remains unmeasured. Pebble Round 2 is emulator-tested; physical Round 2 testing remains open. Alerts cannot fire while the watch is powered off.
# Timer Deck 0.4.1
A fuller deck on Pebble Time 2.
- The deck now shows six rows per page instead of five, so the last row is no longer left empty. With five timers, New timer now appears on the first page.
- Pebble Round 2 keeps five rows to fit the round screen.
- Existing timers, names, icons and settings are kept when updating (storage schema 8, unchanged from 0.4.0).
Known limits: alarms cannot fire while the watch is powered off; background alerts depend on Pebble OS scheduling. Pebble Round 2 support has been tested in the SDK emulator, not yet on a physical Round 2.
# Timer Deck 0.4.0
Progress at a glance, a live launcher subtitle, smoother screens and 30 icons.
- Running and paused countdowns show a progress bar under their deck row; it warms at 25% and 10% remaining, like the ring.
- Larger, smoothed icons: 30 to choose from, including 15 new ones (Water, Meal, Plants, Cleaning, Bath, Bus, Parking, Meeting, Music, Mass, Whistle, Added time, Alarm plus, Love and Sex). Pick them on the watch or from My Apps → Timer Deck → Settings.
- Cleaner deck rows: a ! badge on the icon marks a timer whose alert could not be scheduled.
- A new launcher icon, and after you exit, the launcher shows your most relevant timer, such as "Tea 02:41" counting down live, then "Tea finished".
- Opening a timer slides it in while its ring winds up; Back slides the deck in; Reset winds the ring back to full. Settings → Motion turns these off.
- Existing timers, names, icons and settings are kept when updating. Saved data moves to storage schema 8; version 0.3.0 will not open it (it keeps the data and asks for a newer version).
Known limits: alarms cannot fire while the watch is powered off; background alerts depend on Pebble OS scheduling. Pebble Round 2 support has been tested in the SDK emulator, not yet on a physical Round 2.
# Timer Deck 0.3.0
Add timers from your phone, and native support for Pebble Round 2.
- Add a countdown or stopwatch from My Apps → Timer Deck → Settings, including when the deck is empty. Set its name, icon, countdown duration and countdown alert.
- New timers arrive on the watch in Ready state; they never start or alert by themselves. The ten-timer limit is shared by countdowns and stopwatches.
- Each Add is confirmed only after the watch saves it. Retries after a lost reply or a restart never create a second copy; a rejected Add keeps your entries for review.
- Native Pebble Round 2 layouts for every screen, alongside the existing Pebble Time 2 layout.
- Existing timers, names, icons and settings are kept when updating. Saved data moves to storage schema 7; an older Timer Deck version will not open it.
Keep Timer Deck open on your watch while saving settings, then reopen settings to see the result. Start, pause, reset and delete timers on the watch. Timing works without a phone.
Known limits: alarms cannot fire while the watch is powered off; background alerts depend on Pebble OS scheduling. Pebble Round 2 support has been tested in the SDK emulator, not yet on a physical Round 2.
# Timer Deck 0.2.0
Phone settings are now available from My Apps in the Pebble app.
- Adjust Dark/Light appearance, palette, and default vibration pattern/repeat count.
- Edit individual timer names and choose from all 15 icons.
- Change Ready countdown durations and Ready/Paused countdown alerts.
- Load the current deck from the watch; send only changed fields and confirm each save on the watch.
- Keep offline changes pending for retry, with clear rejected-change feedback.
- Preserve the existing on-watch timing controls and storage schema 6.
Open Timer Deck on your watch before opening its phone settings. After saving, reopen settings to check the result. Create, start, pause, reset and delete timers on the watch. Timing works without a phone.
Known limits: alarms cannot fire while the watch is powered off; background alerts depend on Pebble OS scheduling. The deck-progress/glance/transition PRD is not included.
# Timer Deck 0.1.0
First release for Pebble Time 2 (Emery).
- Keep up to ten independent countdowns and stopwatches on your wrist.
- Create countdowns from one second to 999 days, with quick Start and Save actions.
- Add names and choose from 15 per-timer icons, including Coffee, Focus, Prayer and Reading.
- Follow clockwise countdown rings that warm near completion.
- Choose Ion, Cobalt, Plasma or Solar in Dark or Light appearance.
- Pause, resume, reset and switch timers using the watch buttons.
- Keep saved timers and settings between app sessions, with background wakeup scheduling and configurable vibration alerts.
- Runs on the watch without a companion app or network connection.
Known limits: alarms cannot fire while the watch is powered off. Background alerts depend on Pebble OS scheduling; an unavailable alert is shown in the app. Presets, laps, snooze, automatic cycles and the new deck-progress/glance/transition PRD are not part of this release.